Blame
Date:
Fri Mar 11 05:00:19 2022
UTC
Message:
Daily backup
11
2022-03-11
text=(:title Anope:)%0a%0aIf you want the NickServ, ChanServ and all other *Serv you need to install anope%0a%0aFirst, install the required packages:%0a%0a[@%0a$ doas pkg_add cmake%0a@]%0a%0a[@%0a$ doas useradd -m -g =uid -c "anope" -d /home/anope -s /bin/ksh anope%0a$ doas su anope%0a$ cd ~%0a@]%0a%0aThen download Anope:%0a%0a[@%0a$ ftp https://github.com/anope/anope/archive/2.0.9.tar.gz%0a$ tar zxf 2.0.9.tar.gz%0a$ cd anope-2.0.9%0a@]%0a%0aThis will download the newest version of anope, untar it and change into the directory.%0a%0a[@%0a$ ./Config%0a@]%0a%0aPress enter for every question, it is recommended to use the defaults.%0a%0aThen you need to do the following to build it:%0a%0a[@ %0a$ make%0a$ make install%0a@]%0a%0aOnce the source is built, you can go ahead edit the conf,%0a%0a[@%0a$ cd ~/services/conf%0a$ vi services.conf%0a@]%0a%0aEdit services.conf:%0a%0a# For [@name = "services.host"@] you need to set the 'value =' (below the "name =" line) to: [@services.example.com@]%0a# At uplink block you need to change it to something like this: [@uplink%0a{%0a host = "example.com"%0a ssl = no%0a port = 6667%0a password = "YOURPASSWORDHERE"%0a}@]%0a#and edit the 'serverinfo' block.%0a%0aNow edit your ngircd.conf. Search for the [Server] block (with a lot of comments) and edit the following things:%0a%0a[@%0a# Name = services.example.com%0a# Host = example.com%0a# MyPassword and PeerPassword to the password at the uplink block in services.conf%0a@]%0a%0aThen restart (or reload) your ngircd %0a%0aTo start the services:%0a%0a[@%0a$ cd ~/services/bin%0a$ ./anoperc start%0a@] %0a%0aIf './anoperc start' fails, please double check the conf file.%0a
15
2022-03-11
diff:1646891430:1646891124:=49c49%0a%3c # For [@name = "services.host"@] you need to set the 'value =' (below the "name =" line) to: [@services.example.com@]%0a---%0a> # At [@name = "services.host"@] you need to set the 'value =' (below the "name =" line) to: [@services.example.com@]%0a52c52%0a%3c host = "example.com"%0a---%0a> host = "%3cYOURVPSNAME>.coconut.ircnow.org"%0a55c55%0a%3c password = "YOURPASSWORDHERE"%0a---%0a> password = "%3cTHINK OF THIS BUT PLZ SAVE IT FOR NOW, YOU NEED IT LATER>"%0a59,63c59,64%0a%3c Now edit your ngircd.conf. Search for the [Server] block (with a lot of comments) and edit the following things:%0a%3c %0a%3c [@%0a%3c # Name = services.example.com%0a%3c # Host = example.com%0a---%0a> %0a> Now go to your ngircd conf and if its right then %0a> %0a> Search for the [Server] block (with a lots of comments) and edit the following things:%0a> # Name = services.%3cYOURVPSNAME>.coconut.ircnow.org%0a> # Host = %3cYOURVPSNAME>.coconut.ircnow.org%0a65,70c66,71%0a%3c @]%0a%3c %0a%3c Then restart (or reload) your ngircd %0a%3c %0a%3c To start the services:%0a%3c %0a---%0a> %0a> %0a> then restart (or reload) your ngircd %0a> %0a> then do the following to start the services:%0a> %0a76c77%0a%3c If './anoperc start' fails, please double check the conf file.%0a---%0a> if './anoperc start' fails, plz relook the conf or if you dont get out of the error, you can contact Miniontoby (AKA MiniontobyPI) on the ircnow network%0a
18
2022-03-11
diff:1646891124:1646891013:=9,14d8%0a%3c @]%0a%3c %0a%3c [@%0a%3c $ doas useradd -m -g =uid -c "anope" -d /home/anope -s /bin/ksh anope%0a%3c $ doas su anope%0a%3c $ cd ~%0a
24
2022-03-11
diff:1646890351:1646890189:=1,2d0%0a%3c (:title Anope:)%0a%3c %0a5,6c3,4%0a%3c First, install the required packages:%0a%3c %0a---%0a> To do so you need to firstly install the required packages:%0a> %0a11,12c9,12%0a%3c Then download Anope:%0a%3c %0a---%0a> Then download Anope,%0a> %0a> Do that by executing the following commands:%0a> %0a19,20c19,22%0a%3c This will download the newest version of anope, untar it and change into the directory.%0a%3c %0a---%0a> This will download the newest version of anope, untar it and it will cd into the dir.%0a> %0a> Then what you want to do is the following:%0a> %0a25,26c27,28%0a%3c Press enter for every question, it is recommended to use the defaults.%0a%3c %0a---%0a> and at every question you can press enter, its not recommended to edit any value%0a> %0a28d29%0a%3c %0a34,35c35%0a%3c Once the source is built, you can go ahead edit the conf,%0a%3c %0a---%0a> Then the source is builded and you can go ahead edit the conf,%0a41,43c41,43%0a%3c Edit services.conf:%0a%3c %0a%3c # At [@name = "services.host"@] you need to set the 'value =' (below the "name =" line) to: [@services.example.com@]%0a---%0a> edit at the services.conf the following things:%0a> %0a> # At [@name = "services.host"@] you need to set the 'value =' (below the "name =" line) to: [@services.YOURVPSNAME.coconut.ircnow.org@]%0a
27
2022-03-11
diff:1646890189:1646890161:=8a9%0a> %0a20a22%0a> %0a28a31%0a> %0a32c35%0a%3c $ make install%0a---%0a> $ doas make install%0a
30
2022-03-11
diff:1646890161:1621147622:=6c6%0a%3c $ doas pkg_add cmake%0a---%0a> $ doas pkg_add wget cmake%0a15c15%0a%3c $ ftp https://github.com/anope/anope/archive/2.0.9.tar.gz%0a---%0a> $ wget https://github.com/anope/anope/archive/2.0.9.tar.gz%0a74c74%0a%3c if './anoperc start' fails, plz relook the conf or if you dont get out of the error, you can contact Miniontoby (AKA MiniontobyPI) on the ircnow network%0a---%0a> if './anoperc start' fails, plz relook the conf or if you dont get out of the error, you can contact Miniontoby (AKA MiniontobyPI) on the ircnow network%0a\ No newline at end of file%0a
33
2021-12-17
csum:1621147622=replaced nano with vi, nano is not installed by default. added "$" in lines
34
2021-12-17
diff:1621147622:1612974751:minor=6c6%0a%3c $ doas pkg_add wget cmake%0a---%0a> doas pkg_add wget cmake%0a15,17c15,17%0a%3c $ wget https://github.com/anope/anope/archive/2.0.9.tar.gz%0a%3c $ tar zxf 2.0.9.tar.gz%0a%3c $ cd anope-2.0.9%0a---%0a> wget https://github.com/anope/anope/archive/2.0.9.tar.gz%0a> tar zxf 2.0.9.tar.gz%0a> cd anope-2.0.9%0a26c26%0a%3c $ ./Config%0a---%0a> ./Config%0a34,35c34,35%0a%3c $ make%0a%3c $ doas make install%0a---%0a> make%0a> make install%0a40,41c40,41%0a%3c $ cd ~/services/conf%0a%3c $ vi services.conf%0a---%0a> cd ~/services/conf%0a> nano services.conf%0a70,71c70,71%0a%3c $ cd ~/services/bin%0a%3c $ ./anoperc start%0a---%0a> cd ~/services/bin%0a> ./anoperc start%0a
37
2021-12-17
diff:1612974751:1612974751:=1,74d0%0a%3c If you want the NickServ, ChanServ and all other *Serv you need to install anope%0a%3c %0a%3c To do so you need to firstly install the required packages:%0a%3c %0a%3c [@%0a%3c doas pkg_add wget cmake%0a%3c @]%0a%3c %0a%3c %0a%3c Then download Anope,%0a%3c %0a%3c Do that by executing the following commands:%0a%3c %0a%3c [@%0a%3c wget https://github.com/anope/anope/archive/2.0.9.tar.gz%0a%3c tar zxf 2.0.9.tar.gz%0a%3c cd anope-2.0.9%0a%3c @]%0a%3c %0a%3c This will download the newest version of anope, untar it and it will cd into the dir.%0a%3c %0a%3c %0a%3c Then what you want to do is the following:%0a%3c %0a%3c [@%0a%3c ./Config%0a%3c @]%0a%3c %0a%3c and at every question you can press enter, its not recommended to edit any value%0a%3c %0a%3c %0a%3c Then you need to do the following to build it:%0a%3c [@ %0a%3c make%0a%3c make install%0a%3c @]%0a%3c %0a%3c Then the source is builded and you can go ahead edit the conf,%0a%3c [@%0a%3c cd ~/services/conf%0a%3c nano services.conf%0a%3c @]%0a%3c %0a%3c edit at the services.conf the following things:%0a%3c %0a%3c # At [@name = "services.host"@] you need to set the 'value =' (below the "name =" line) to: [@services.YOURVPSNAME.coconut.ircnow.org@]%0a%3c # At uplink block you need to change it to something like this: [@uplink%0a%3c {%0a%3c host = "%3cYOURVPSNAME>.coconut.ircnow.org"%0a%3c ssl = no%0a%3c port = 6667%0a%3c password = "%3cTHINK OF THIS BUT PLZ SAVE IT FOR NOW, YOU NEED IT LATER>"%0a%3c }@]%0a%3c #and edit the 'serverinfo' block.%0a%3c %0a%3c %0a%3c Now go to your ngircd conf and if its right then %0a%3c %0a%3c Search for the [Server] block (with a lots of comments) and edit the following things:%0a%3c # Name = services.%3cYOURVPSNAME>.coconut.ircnow.org%0a%3c # Host = %3cYOURVPSNAME>.coconut.ircnow.org%0a%3c # MyPassword and PeerPassword to the password at the uplink block in services.conf%0a%3c %0a%3c %0a%3c then restart (or reload) your ngircd %0a%3c %0a%3c then do the following to start the services:%0a%3c %0a%3c [@%0a%3c cd ~/services/bin%0a%3c ./anoperc start%0a%3c @] %0a%3c %0a%3c if './anoperc start' fails, plz relook the conf or if you dont get out of the error, you can contact Miniontoby (AKA MiniontobyPI) on the ircnow network%0a\ No newline at end of file%0a