version=pmwiki-2.2.130 ordered=1 urlencoded=1 agent=Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/91.0.4472.77 Safari/537.36 Edg/91.0.864.37 author=miniontoby charset=UTF-8 csum=cp ctime=1610891278 host=77.168.188.164 name=Openbsd.Anope rev=3 targets= text=If you want the NickServ, ChanServ and all other *Serv you need to install anope%0a%0aTo do so you need to firstly install the required packages:%0a%0a[@%0adoas pkg_add wget cmake%0a@]%0a%0a%0aThen download Anope,%0a%0aDo that by executing the following commands:%0a%0a[@%0awget https://github.com/anope/anope/archive/2.0.9.tar.gz%0atar zxf 2.0.9.tar.gz%0acd anope-2.0.9%0a@]%0a%0aThis will download the newest version of anope, untar it and it will cd into the dir.%0a%0a%0aThen what you want to do is the following:%0a%0a[@%0a./Config%0a@]%0a%0aand at every question you can press enter, its not recommended to edit any value%0a%0a%0aThen you need to do the following to build it:%0a[@ %0amake%0amake install%0a@]%0a%0aThen the source is builded and you can go ahead edit the conf,%0a[@%0acd ~/services/conf%0acp example.conf services.conf%0anano services.conf%0a@]%0a%0aedit at the services.conf the following things:%0a%0a# At [@name = "services.host"@] you need to set the 'value =' (below the "name =" line) to: [@services.YOURVPSNAME.coconut.ircnow.org@]%0a# At uplink block you need to change it to something like this: [@uplink%0a{%0a host = "%3cYOURVPSNAME>.coconut.ircnow.org"%0a ssl = no%0a port = 6667%0a password = "%3cTHINK OF THIS BUT PLZ SAVE IT FOR NOW, YOU NEED IT LATER>"%0a}@]%0a#and edit the 'serverinfo' block.%0a%0a%0aNow go to your ngircd conf and if its right then %0a%0aSearch for the [Server] block (with a lots of comments) and edit the following things:%0a# Name = services.%3cYOURVPSNAME>.coconut.ircnow.org%0a# Host = %3cYOURVPSNAME>.coconut.ircnow.org%0a# MyPassword and PeerPassword to the password at the uplink block in services.conf%0a%0a%0athen restart (or reload) your ngircd %0a%0athen do the following to start the services:%0a%0a[@%0acd ~/services/bin%0a./anoperc start%0a@] %0a%0aif './anoperc start' fails, plz relook the conf or if you dont get out of the error, you can contact Miniontoby (AKA MiniontobyPI) on the ircnow network%0a%0a----%0a%0aCopyright (C) 2021 by Miniontoby %3cminiontoby@ircnow.org>%0a time=1622456673 author:1622456673=miniontoby csum:1622456673=cp diff:1622456673:1610900758:=41d40%0a%3c cp example.conf services.conf%0a host:1622456673=77.168.188.164 author:1610900758=miniontoby csum:1610900758=layout better diff:1610900758:1610891278:=9,11c9,10%0a%3c %0a%3c Then download Anope,%0a%3c %0a---%0a> To do that you need to firstly download Anope,%0a> %0a22d20%0a%3c %0a31d28%0a%3c %0a32a30%0a> %0a38a37%0a> %0a46,47c45,52%0a%3c # At [@name = "services.host"@] you need to set the 'value =' (below the "name =" line) to: [@services.YOURVPSNAME.coconut.ircnow.org@]%0a%3c # At uplink block you need to change it to something like this: [@uplink%0a---%0a> [@Line 93: %0a> change the 'value = ' line of the 'name = "services.host"', into: %0a> 'value = "services.YOURVPSNAME.coconut.ircnow.org"'%0a> %0a> %0a> edit the uplink block to something like this%0a> '%0a> uplink%0a53,68c58,68%0a%3c }@]%0a%3c #and edit the 'serverinfo' block.%0a%3c %0a%3c %0a%3c Now go to your ngircd conf and if its right then %0a%3c %0a%3c Search for the [Server] block (with a lots of comments) and edit the following things:%0a%3c # Name = services.%3cYOURVPSNAME>.coconut.ircnow.org%0a%3c # Host = %3cYOURVPSNAME>.coconut.ircnow.org%0a%3c # MyPassword and PeerPassword to the password at the uplink block in services.conf%0a%3c %0a%3c %0a%3c then restart (or reload) your ngircd %0a%3c %0a%3c then do the following to start the services:%0a%3c %0a---%0a> }%0a> ' %0a> %0a> %0a> and edit the 'serverinfo' block.%0a> @]%0a> %0a> Now go to your ngircd conf and if its right then at the first [Server] block there should be lots of comments, use that block%0a> %0a> And edit the following things:%0a> %0a69a70,84%0a> change: %0a> Name = services.%3cYOURVPSNAME>.coconut.ircnow.org%0a> %0a> and:%0a> Host = %3cYOURVPSNAME>.coconut.ircnow.org%0a> %0a> and:%0a> MyPassword and PeerPassword to the password at the uplink block in services.conf%0a> @]%0a> %0a> then restart (or reload) your ngircd %0a> %0a> then do the following to start the services:%0a> %0a> [@%0a74c89%0a%3c if './anoperc start' fails, plz relook the conf or if you dont get out of the error, you can contact Miniontoby (AKA MiniontobyPI) on the ircnow network%0a---%0a> if ./anoperc start fails, plz relook the conf or if you dont get out of the error, you can contact Miniontoby (AKA MiniontobyPI) on the ircnow network%0a host:1610900758=145.132.146.30 author:1610891278=miniontoby csum:1610891278=created and fully writen diff:1610891278:1610891278:=1,93d0%0a%3c If you want the NickServ, ChanServ and all other *Serv you need to install anope%0a%3c %0a%3c To do so you need to firstly install the required packages:%0a%3c %0a%3c [@%0a%3c doas pkg_add wget cmake%0a%3c @]%0a%3c %0a%3c To do that you need to firstly download Anope,%0a%3c %0a%3c Do that by executing the following commands:%0a%3c %0a%3c [@%0a%3c wget https://github.com/anope/anope/archive/2.0.9.tar.gz%0a%3c tar zxf 2.0.9.tar.gz%0a%3c cd anope-2.0.9%0a%3c @]%0a%3c %0a%3c This will download the newest version of anope, untar it and it will cd into the dir.%0a%3c %0a%3c Then what you want to do is the following:%0a%3c %0a%3c [@%0a%3c ./Config%0a%3c @]%0a%3c %0a%3c and at every question you can press enter, its not recommended to edit any value%0a%3c %0a%3c Then you need to do the following to build it:%0a%3c %0a%3c [@ %0a%3c make%0a%3c make install%0a%3c @]%0a%3c %0a%3c Then the source is builded and you can go ahead edit the conf,%0a%3c %0a%3c [@%0a%3c cd ~/services/conf%0a%3c nano services.conf%0a%3c @]%0a%3c %0a%3c edit at the services.conf the following things:%0a%3c %0a%3c [@Line 93: %0a%3c change the 'value = ' line of the 'name = "services.host"', into: %0a%3c 'value = "services.YOURVPSNAME.coconut.ircnow.org"'%0a%3c %0a%3c %0a%3c edit the uplink block to something like this%0a%3c '%0a%3c uplink%0a%3c {%0a%3c host = "%3cYOURVPSNAME>.coconut.ircnow.org"%0a%3c ssl = no%0a%3c port = 6667%0a%3c password = "%3cTHINK OF THIS BUT PLZ SAVE IT FOR NOW, YOU NEED IT LATER>"%0a%3c }%0a%3c ' %0a%3c %0a%3c %0a%3c and edit the 'serverinfo' block.%0a%3c @]%0a%3c %0a%3c Now go to your ngircd conf and if its right then at the first [Server] block there should be lots of comments, use that block%0a%3c %0a%3c And edit the following things:%0a%3c %0a%3c [@%0a%3c change: %0a%3c Name = services.%3cYOURVPSNAME>.coconut.ircnow.org%0a%3c %0a%3c and:%0a%3c Host = %3cYOURVPSNAME>.coconut.ircnow.org%0a%3c %0a%3c and:%0a%3c MyPassword and PeerPassword to the password at the uplink block in services.conf%0a%3c @]%0a%3c %0a%3c then restart (or reload) your ngircd %0a%3c %0a%3c then do the following to start the services:%0a%3c %0a%3c [@%0a%3c cd ~/services/bin%0a%3c ./anoperc start%0a%3c @] %0a%3c %0a%3c if ./anoperc start fails, plz relook the conf or if you dont get out of the error, you can contact Miniontoby (AKA MiniontobyPI) on the ircnow network%0a%3c %0a%3c ----%0a%3c %0a%3c Copyright (C) 2021 by Miniontoby %3cminiontoby@ircnow.org>%0a host:1610891278=145.132.146.30